User's Guide

Chapter 2 Basic Operations
Turning on the DX-Series Components
Quantum DX-Series User’s Guide 18
Turning on the DX30 2 The DX30 components must be turned on in the following order:
• DX-Series storage array(s)
• DX-Series controller
To turn on the DX30 system (see figure 10):
1 Turn on both power switches on all DX-Series storage arrays.
2 Turn the DX30 controller on by pushing the power button located on
the front of the unit
Turning on the DX100 2 The DX100 must be powered on in the following sequence (see figure 10):
1 Turn on both power switches on the storage arrays (they will not
power on yet).
2 Turn on the circuit breakers of the AC power sequencers.
3 Turn on the DX100 controller.