User's Guide

Appendix B Setup CD and Setup Menu
DX-Series Setup Menu
Quantum DX-Series User’s Guide 120
• System IP Address
•Network Mask
• Network Gateway IP Address
•Network Domain Name
• Network DNS IP Address
• Network Link Speed and Duplex Mode
The system displays the information and asks for confirmation.
4 If the configuration information is correct, type y and press Enter.
The DX-Series Setup Menu displays.
5 Select 6 to restart the DX-Series system.
The system reboots.
Creating Cartridges 2 To create cartridges on the storage array(s):
Caution: Creating cartridges will destroy all data on existing
storage array cartridges.
1 Select 3 from the DX-Series Setup Menu to configure the user options.
2 The system warns you that creating cartridges will destroy any
existing cartridge data and prompts you to continue. Type y and the
system services are shut down.
The cartridge creation process asks you to make the following
selection:
•Type 1 to create cartridges on ALL storage arrays.
•Type 2 to create cartridges on a SPECIFIED storage array.
Caution: If this is an upgrade to an existing system, create
cartridges ONLY on the new storage array.
•Type 3 to create cartridges on a specified RAID set.
•Type 4 to exit create cartridges.
Note: All default values are shown in [ ].