User's Guide

Chapter 3 DX-Series Remote Management
Configuration
Quantum DX-Series User’s Guide 43
Figure 24 Assigning a
Library Name
2 Enter a library name and click Apply.
The DX-Series system will use the new library name the next time the
system is rebooted.
Configuring the
Network
3
The network configuration information was entered during the initial
setup of the DX-Series system. Consult your network administrator prior
to changing any of the information.
Viewing/Editing Network Configuration 3
1 To access the Network Configuration page, from the Configuration
page, click
Network.
The management frame displays the Network Configuration page (see
figure 25).
Note: The library name is independent of the host name in the
Network tab (see Configuring the Network on page 43).