User's Guide

Chapter 2 Emulated Medium Changer SCSI Commands
Position To Element (2Bh)
Quantum DX-Series Software Interface Guide 53
• Logical Unit Number
The Logical Unit Number must be set to 0. This field indicates the
logical unit to which the command is sent.
• Transport Element Address
The default medium transport element address of 0 or the medium
transport element address specified by the mode sense data can be
used.
• Destination Element Address
The destination address specifies the location to which the medium
transport element is moved.
•Invert
The medium changer does not support medium rotation for handling
double-sided media. The invert bit must be set to 0.
6
Reserved (00h)
7
8
Reserved (00h)
Invert
(0)
9
Reserved (00h)
Bit/Byte76543210