User's Guide

Chapter 2 Emulated Medium Changer SCSI Commands
Move Medium (A5h)
Quantum DX-Series Software Interface Guide 51
• Logical Unit Number
The Logical Unit Number must be set to 0. This field indicates the
logical unit to which the command is sent.
• Transport Element Address
The default medium transport element address of 0 or the medium
transport element address specified by the Mode Sense Data can be
used.
• Source Element Address
The source element address specifies the location from which the
medium is taken.
• Destination Element Address
The destination address specifies the location to which the medium is
moved.
•Invert
The medium changer does not support medium rotation for handling
double-sided media. The Invert bit must be set to 0.
4
(MSB)
Source Element Address
5
(LSB)
6
(MSB)
Destination Element Address
7
(LSB)
8
Reserved (0000h)
9
10
Reserved (00h)
Invert
(0)
11
Reserved (00h)
Bit/Byte76543210