User's Guide

Chapter 2 Emulated Medium Changer SCSI Commands
Inquiry (12h)
Quantum DX-Series Software Interface Guide 19
•WBus16
1 bit value indicates the DX-Series system supports 16-bit wide
transfers.
•Sync
Synchronous transfer value of 0 indicates the device does not support
synchronous data transfer.
•Linked
Linked command value of 0 indicates the device does not support
linked commands for this DX-Series system.
•CMDQue
Command queuing value of 0 indicates the device does not support
tagged command queuing for this DX-Series system.
•SftRes
• A soft reset bit of 0 indicates the device responds to the RESET
condition with a hard reset
• A soft reset bit of 1 indicates the device responds to the RESET
condition with a soft reset
• Vendor ID
The vendor ID string is selectable. The default inquiry string is P1000
and the alternate inquiry string is DX30 or DX100.
For the P1000 inquiry - this field contains the string ATLbbbbb.
For the DX30 inquiry - this field contains the string QUANTUMb
For the DX100 inquiry - this field contains the string QUANTUMb
For the DX3000 inquiry - this field contains the string QUANTUMb
For the DX5000 inquiry - this field contains the string QUANTUMb