User's Guide

Appendix C DLT7000 Sense Code Values
294 Quantum DX-Series Software Interface Guide
53 00 Media Load/Eject Failure
53 01 Unload Tape Failure
53 02 Media Removal Prevented
5A 01 Operator Media Removal Request
5B 01 Log Threshold Condition Met
5B 02 Log Counter at Maximum
5D 00 Tape Alert Failure Prediction Threshold
Exceeded
5D FF False Exception Condition
80 00 Calibration Error (use cleaning tape)
80 01 Cleaning Required (use cleaning tape)
80 02 Cleaning Requested (use cleaning tape)
81 00 Directory Read Error (use cleaning tape)
82 00 Not Allowed if not at BOT
82 01 LUN Communications Time-out
83 00 Can not Retry Read/Write Data Transfer (a
READ/WRITE Data Transfer was aborted due
to a bus parity error or unexpected ATN.
XX YY Code Update Event (where XX = Drive
revision
code; YY = Controller revision code)
1
Medium changer specific command.
2
Contact a service representative.
3
Bad firmware image or code download possible.
ASC ASCQ Description