User's Guide

Appendix B Media Changer Sense Code Values
Quantum DX-Series Software Interface Guide 285
3B 0E
MEDIUM SOURCE ELEMENT EMPTY
Source element address does not contain a
cartridge. Issue a
Read Element Status
command and retry move command. If the
problem recurs, issue an
Initialize Element
Status
command followed by a Read Element
Status
command and retry the move
command.
3F 0E
REPORTED LUNS DATA HAS CHANGED
45 00 SELECT OR RE-SELECT FAILURE
DX-Series system timed out trying to reselect
host. Make sure host is running.
47 00
SCSI PARITY ERROR
SCSI Parity Error detected. Check cable
connections and cable length.
48 00
INITIATOR DETECTED ERROR
Initiator Detected Error Message was received
from the host.
4E 00
OVERLAPPED COMMANDS ATTEMPTED
Due to a second command being sent from the
same host before a previous command has
completed, the previous command has been
aborted. This may also occur when executing
off-line commands via the control panel and
DIAG port simultaneously.
53 02
MEDIUM REMOVAL PREVENTED
Prevent Medium Removal
command was
executed and command was received to export
cartridge.
Execute Allow Medium Removal
command and retry move medium command.
ASC ASCQ Message Name/Description