User's Guide

Appendix B Media Changer Sense Code Values
284 Quantum DX-Series Software Interface Guide
29 03
BUS DEVICE RESET OCCURRED
29 04
INTERNAL DEVICE RESET OCCURRED
2A 01
MODE PARAMETERS CHANGED
Mode parameters may have changed due to
another host issuing a
Mode Select command.
39 00
SAVING PARAMETERS NOT SUPPORTED
Verify Save Parameter field in the Mode
Sense
command complies with the command
format described in this guide.
3A 00
MEDIUM NOT PRESENT
The inventory indicated that a cartridge was in
this bin but no cartridge was sensed by the
gripper when it attempted to pick it. Retry the
command. Check for proper seating of the
cartridge. It may also indicate that the tape is
not ready to be picked from the drive because
the tape is not fully unloaded. Retry the
command. If the problem persists, check the
function of the tape drive handle assembly.
Manually unload the tape.
3B 0D
MEDIUM DESTINATION ELEMENT FULL
Destination element address already contains
a cartridge. Issue a
Read Element Status
command and retry move command. If the
problem recurs, issue an
Initialize Element
Status
command followed by a Read Element
Status
command and retry move command.
ASC ASCQ Message Name/Description