User's Guide

Chapter 3 Emulated DLT7000 SCSI Commands
Verify (13h)
270 Quantum DX-Series Software Interface Guide
Fixed This bit specifies whether fixed-length or variable-
length blocks are to be verified.
When set to 0, variable-block mode is requested. A
single block is transferred with the Verification
Length specifying the maximum number of bytes
the initiator has allocated for verification.
When the Fixed bit is set to 1, the Verification
Length specifies the number of blocks to be verified.
This is valid only if the logical unit is currently
operating in Fixed Block mode.
Verification
Length
This field specifies the amount of data to verify, in
blocks or bytes as indicated by the Fixed bit.
Field Name Description