User's Guide

Chapter 3 Emulated DLT7000 SCSI Commands
Receive Diagnostic Results (1Ch)
Quantum DX-Series Software Interface Guide 241
Receive Diagnostic Results (1Ch) 3
The RECEIVE DIAGNOSTIC RESULTS command fetches the results of the
last
SEND DIAGNOSTIC command sent to the tape drive.
Table 192 RECEIVE
DIAGNOSTIC
RESULTS Command
Descriptor Block -
Data Format
Bit/Byte 7 6 5 4 3 2 1 0
0
1
2
3-4
5
Table 193 RECEIVE
DIAGNOSTIC
RESULTS Command
Data - Field
Descriptions
The following data is returned by the drive as a result of the RECEIVE
DIAGNOSTIC
command. Note that a REQUEST SENSE command should
be used to obtain more detailed information following a
CHECK
CONDITION
on a SEND DIAGNOSTIC command.
Operation Code (1Ch)
Logical Unit Number Reserved
Reserved
(MSB)
Allocation Length
(LSB)
Unused Reserved
Flag (0) Link (0)
Field Name Description
Allocation
Length
Specifies the number of bytes of diagnostic page
results the drive is allowed to send to the initiator.