User's Guide

Chapter 3 Emulated DLT7000 SCSI Commands
Mode Sense (6/10) (1Ah / 5Ah)
214 Quantum DX-Series Software Interface Guide
Table 165 Disconnect
/ Reconnect Page -
Field Descriptions
Field Name Description
PS Parameters Savable. When 0, the supported
parameters cannot be saved (savable pages are not
supported). When set to 1, it indicates that the page
can be saved in nonvolatile memory by the drive.
Additional
Page Length
This field indicates the number of bytes in the page.
Note that this value does not include bytes 0 and 1.
The length is returned on MODE SENSE and must
subsequently be set to the same value when
performing MODE SELECT.
Buffer Full
Ratio
Not supported.
Buffer
Empty Ratio
Not supported.
Bus
Inactivity
Limit
Not supported.
Disconnect
Time Limit
Not supported.
Connect
Time Limit
Not supported.
Maximum
Burst Size
The value in this field specifies the maximum
amount of data to be transferred without
disconnecting. A value of 0 sets no limit. This value
is given in 512 byte increments. For example, a
value of 8 indicates 4K bytes. Values that are not
multiples of 8 are rounded up to the nearest
multiple of 8.
DTDC Data Transfer Disconnect Control. The value in this
field specifies the restriction when a disconnect is
permitted.