User's Guide

Chapter 3 Emulated DLT7000 SCSI Commands
Mode Select (6 /10) (15h / 55h)
Quantum DX-Series Software Interface Guide 197
Table 150 TapeAlert
Page Format
Descriptor - Field
Descriptions
3
Reserved MRIE
4-7
(MSB)
Interval Timer
(LSB)
8-11
(MSB)
Report Count / Test Flag Number
(LSB)
Field Name Description
PS Parameters Savable. For MODE SELECT, this bit
must be 0.
Additional
Page Length
This field indicates the number bytes in the page.
However, the value does not include bytes 0 and 1.
The length is returned in MODE SENSE commands
and must subsequently be set to the same value
when performing MODE SELECT. If the page
length does not match that expected by the drive, a
CHECK CONDITION status is returned, sense key
set to ILLEGAL REQUEST.
The drive returns a CHECK CONDITION status
with sense key set to ILLEGAL REQUEST if it
receives an unsupported Page Code or a Page field
with values not supported or changeable. In such
cases, no parameters are changed as a result of the
command.
Perf Performance bit. Not supported, always = 0.
Bit/Byte76543210