User's Guide

Chapter 3 Emulated DLT7000 SCSI Commands
Inquiry (12h)
128 Quantum DX-Series Software Interface Guide
Response Data Format 2 This Standard Inquiry Data is in SCSI-2 format.
Additional Length 33h Tape drive uses this field to indicate the number of
additional bytes of INQUIRY Response Data available.
Mchnger 0 Set to 1 if a Media Changer (Loader) is present and
EEPROM parameter EnbIngMedChgr is set to 1. This
SCSI-3 bit indicates that the Read Element Status and
Move Medium commands can be issued to the drive
(LUN0). By default, this bit is set to 0 on the DLT7000.
RelAdr 0 Relative Addressing is not supported.
WBus 32 0 Set to 0 since the drive does not support 32-bit transfer.
WBus 16 0 The WBus bit is 0 since the drive supports 16-bit data
transfer.
Sync 0 The drive supports Synchronous Data Transfers.
Linked 0 Linked Commands are supported.
CmdQue 0 The drive does not support Tagged Command Queuing.
SftRe 0 The drive implements the hard reset option in response to
assertion of the SCSI Bus reset line.
Vendor Identification The value in this field is QUANTUM (there is one space
after the word Quantum)
Product Identification The value in this field is DLT7000 (there is spaces after the
word DLT7000)
Field Name Value Description