User's Guide

Chapter 2 DPM5500 Remote User Interface
Network Configuration
Quantum DPM5500 User’s Guide 27
Table 10 RAID Status
Information
When finished viewing the RAID screen, click OK.
Network Configuration 2
The Network Configuration page allows you to view and edit the system
network configuration information.
Accessing Network
Configuration
2
To access the Network Configuration page, from the DPM5500 web pages,
click
Network Configuration located at the top of the screen.
The Network Configuration page displays (see figure 17).
Field Description
RAID Controllers
There are two RAID controllers in the DPM5500.
Up to twelve hard drives can be assigned to each
RAID controller.
RAID Sets
Each controller can have two possible RAID sets
(see table 8
on page 23).
Hard Drives
The DPM5500 can have up to twenty four hard
drives installed.
Hot Spares
The DPM5500 can have up to two “hot-spare”
hard drives in the system (one hot spare per RAID
controller).