User's Manual

Configuring and Operating the DLT4500 Mini-Library
DLT4000/DLT4500/DLT4700 Cartridge Tape Subsytem 4-19
4.7.4 Firmware Update Mode
In Normal Mode note, pressing the Display Mode button twice will put the mini-
library in Firmware Update mode.
In Density Select Mode the two line display is defined in figure 4-9
Firmware Update
Mode
Figure 4-9 Firmware Update Mode Field Definition
Table 4-8 lists displayed messages during operation.
Table 4-8 Firmware Update Mode Display Message
Display Message Tells you ...
Firmware Update Mode Used for code updates; refer to Chapter seven of
this manual.
Switch Functions
While in Firmware Update Mode:
When you press and release the Display Mode button once, the mini-library enters
Normal mode.