User's Manual

Configuring and Operating the DLT4500 Mini-Library
DLT4000/DLT4500/DLT4700 Cartridge Tape Subsytem 4-17
Table 4-6 lists displayed cartridge current and new density messages during Density
Select Mode operation.
Table 4-6 Cartridge Density Display
Display Message
Tells you ……
2.6
• On steady indicates the tape is recorded in 2.6
format.
• Flashing indicates the tape is recorded in another
density. You selected this density for a write from
BOT.
6
• On steady indicates the tape is recorded in 6 GB
format.
• Blinking indicates the tape is recorded in another
density. You selected this density for a write from
BOT.
10/15
• On steady indicates the tape is recorded in
10 GB format.
• Flashing indicates the tape is recorded in another
density. You selected this density for a write from
BOT.
10/15C
• On steady indicates Compression Mode is enabled.
Compression can be active in 10 and 20 GB
density only.
• Off indicates Compression Mode is disabled
20
• On steady indicates the tape is recorded in
20 GB format.
• Flashing indicates the tape is recorded in another
density. You selected this density for a write from
BOT.
20C
• On steady indicates Compression Mode is enabled.
Compression can be active in 20 and 40 GB
density only.
• Off indicates Compression Mode is disabled.