User's Manual

Configuring and Operating the DLT4500 Mini-Library
4-14 DLT4000/DLT4500/DLT4700 Cartridge Tape Subsytem
4.6.1 Normal Mode Displays
In Normal Mode the two line display is defined in figure 4.6.
Autoloader Status (reference table 4-3).
HC SLOT
NUMBER
DENSITY WP
Figure 4-6 Normal Mode Field Definition
Table 4-3 lists the line one displayed messages during Normal Mode operation.
Table 4-3 Normal Mode, Line One
Display Message
Tells you ……
DRV ACT
Tape is reading or writing
DRV RDY A cartridge is in the drive and the tape is not moving.
DRV REW Tape is rewinding.
LDR RDY Power is on and no cartridge is in the drive.
LDR ACT Loader is moving a cartridge.
ERR MAG The status of cartridges reported by the loader and the
drive is inconsistent.
ERR LDR A loader transfer assembly error occurred.
ERR DRV A drive error occurred.
ERR CTL A controller error occurred.
ERR UNK An error of unknown origin occurred.