User's Manual

Configuring and Operating the DLT4000 Basic Tape Drive
DLT4000/DLT4500/DLT4700 Cartridge Tape Subsystem 3-5
2. Place the jumper in the disable parity check position, as shown in Letter I, Figure
3-3.
LKG-9294-94f
A B C D
HG
F
E
8 - Bit
I
A. SCSI ID 0 D. SCSI ID 3 G. SCSI ID 6
B. SCSI ID 1 E. SCSI ID 4 H. SCSI ID 7
C. SCSI ID 2 F. SCSI ID 5 I. Disable parity checking.
The jumper goes in this
position with any SCSI ID
you choose.
Figure 3-3 Jumper Positions
3.2.2 Changing the SCSI ID
The drive is shipped with SCSI ID 5, unless otherwise specified. You can change the
SCSI ID by adding jumpers to the drive's SCSI connector (Figure 3-1).