User's Manual

Configuring and Operating the DLT4000 Basic Tape Drive
3-4 DLT4000/DLT4500/DLT4700 Cartridge Tape Subsystem
Figure 3-2 shows what the pins on the SCSI ID connector represent.
ID Pins
LKG-9295-94F
Remote ID
Present
Disable
Parity
Figure 3-2 SCSI ID Connector Pins
_________________________NOTE ____________________________
A jumper must always be placed on the Remote ID Present position
(Figure 3-2) for the host to recognize any ID selection on this connector.
___________________________________________________________