User's Manual

DLT4000/DLT4500/DLT4700 Cartridge Tape Subsystem 3-1
Chapter 3
Configuring and Operating the DLT4000
Basic Tape Drive
3.1 In This Chapter
The configuration section in this chapter applies to the basic drive without the SCSI
ID switchpack and power supply. (Chapter 2 applies to configuring the tabletop).
Chapter 3 includes these main topics and sections:
Topic Section
Before You Install the DLT4000 Drive 3.2
Selecting Density 3.3
Overview of the Front Panel 3.4
Description of Controls and Indicators 3.5
Description of the Tape Cartridge 3.6
Loading a Cartridge 3.7
Using the Cleaning Tape Cartridge 3.8
Unloading a Cartridge 3.9
Preserving Cartridges 3.10
3.2 Before You Install the DLT4000 Drive
Section 3.2 includes:
Topic Section
Disabling Parity Checking 3.2.1
Changing the SCSI ID 3.2.2
Setting the TRM PWR jumpers 3.2.3
Locating the SCSI Cable and Power
Connectors
3.2.4