User's Manual

Installing and Configuring the DLT4000 Tabletop Drive
2-10 DLT4000/DLT4500/DLT4700 Cartridge Tape Subsystem
POST completes in about 13 seconds and the drive responds normally to all
commands. However, it might take longer for the media to become ready. After a bus
reset, the tape drive responds within a bus selection time-out period.
2.6.2 What to Do after POST
Table 2-3 After POST
If …… Then ……
All the events in Table 2-2 took
place
POST succeeded. Bring up the system
and run the optional system tests. See
Chapter 3 for operating the drive and
selecting density.
All left- or right-side indicators on
the DLT4000 front panel blink only
POST failed. See Table 2-4.