User's Manual

DLT4000/DLT4500/DLT4700 Cartridge Tape Subsystem 2-1
Chapter 2
Installing and Configuring the DLT4000
Tabletop
2.1 In This Chapter
Chapter 2 includes the following main topics and sections:
Topic Section
Prepare for the Installation 2.2
Install the DLT4000 Tabletop Drive 2.3
Configure the DLT4000 Tabletop Drive 2.4
Connect the Cables 2.5
Test the Installation 2.6
DLT4000 Troubleshooting Chart 2.7
2.2 Prepare for the Installation
This section describes how to prepare for the installation of the DLT4000 tabletop
drive including:
Topic Section
Before You Start 2.2.1
Installation Setup 2.2.2
Site Setup 2.2.3
Site Guidelines 2.2.4
2.2.1 Before You Start
Installing the DLT4000 tabletop drive requires no special tools. If you need to change
the switchpack settings on the rear panel, you will need a pen.
If you have problems during the installation, see Table 2-4 for troubleshooting.