User's Manual
Definition of Vendor Unique Sense Data Information
B-2 DLT4000/DLT4500/DLT4700 Cartridge Tape Subsystem
Table B-1 Internal Status Code (cont’d)
Dec Hex Description
9 9 Cleared from queue
10 0A
Missing data blockread only
11 0B Gap within object (missing blocks in record)
12 0C Record on tape larger than requested
13 0D Compare error
14 0E Successive blocks missing across objects
15 0F Drive state not valid for command
16 10 Drive error
17 11 Drive communication timeout error
18 12 Drive unloaded
19 13 Unable to write - no CRC
20 14 Block to append to not found
21 15 Data synchronization error (read after write not happening)
22 16 Missing block(s) in current entity
23 17 Drive hardware write protected
24 18 Reposition-target not found
25 19 Long gap encountered (blank tape or no data encountered)
26 1A End of data or filler block encountered
27 1B File mark encountered
28 1C EDC error found by GPSP3 - FECC RAM bad
29 1D Beginning of medium encountered
30 1E EDC error
31 1F Hard write error - GPSP3 Underrun
32 20 Hard write error - Read Sync Timeout
33 21 Hard write error - Overshoot Append
34 22 Hard write error - CRC error
35 23 EDC error found by GPSP3 - FECC RAM ok
36 24 Timeout on command to medium changer
37 25 Medium changer UART error (overrun)
38 26 Medium changer response length error
39 27 Medium changer detected error