User's Manual

Technical Specifications
A-10 DLT4000/DLT4500/DLT4700 Cartridge Tape Subsystem
A.5 DLT4000 Tape Drive Mounting Hole Descriptions
Figure A-2 shows the mounting holes and dimensions in a top view of the DLT4000
drive.
Figure A-2 Mounting Hole Dimensions (Top View)
Tape drive width and height are standard 5-1/4 inch disk drive form factor
measurements. Both dimensions hold tolerances of ± 0.020 inches. Depth dimensions
have tolerances of +00, -0.040 in.