User's Manual

DLT4000 SCSI Interface
DLT4000/DLT4500/DLT4700 Cartridge Tape Subsystem 8-
8. .10 9 EEROM Vendor Unique Page (3Eh)
parameters that are settable through MODE SELECT EEROM vendor unique page
are returned.
NOTE ____________________________
MODE SENSE (6) to retrieve EEROM parameters
________________________________
Because of the length of the EEROM parameter, a 10-byte MODE SENSE command
is required to retrieve the parameters. If a 6-byte MODE SENSE command is used to
"Send a 10-byte MODE SENSE command to get the Parameter List."
The data returned by the 10-byte MODE SENSE command for the EEROM page is in
The data in the page descriptor is organized in the form of a parameter header
followed by the actual parameters value. The parameter header is as follows:
--------
Current Default
-------- -----------
Maximum
Name refers to the parameter name, for example, PRODUCTID or
DEFFAULTCOMPON.
decimal data type if not specified.
Current/Default/ Minimum/Maximum specifies the