User's Manual

Firmware Update (From Tape)
7-12 DLT4000/DLT4500/DLT4700 Cartridge Tape Subsystem
Table 7-2 Results (DLT4500) Code Update) (Cont'd)
If …… This means …… And you should ……
• The code update
cartridge contains a
corrupted image file
or the file is built
improperly.
1. Press the Unload
button to unload the
tape cartridge from
the drive.
2. Press the Open
button to open the
magazine door.
3. Remove the
magazine and close
the door. The mini-
library does an
elevator scan.
4. Open the door
again. The message
LDR RDY displays.
5. Verify you have the
valid image for
your drive type
(variant) in the
magazine. Ensure
the image copied to
the tape cartridge is
using a block size
of 4096.
6. Try the code update
procedure again
using the valid tape
image.
If you still cannot do the
update, call your service
representative.