User's Manual

Troubleshooting Guide for the DLT4500/DLT4700 Mini-Library
DLT4000/DLT4500/DLT4700 Cartridge Tape Subsystem 6-3
See Chapter 5 for more information on the functions of the DLT4700 OCP buttons.
Table 6-2 DLT4700 OCP Button Conditions
If you want to …… First ensure the ……
Then you can press
this button ……
Select another slot in the
magazine
• Magazine contains at
least two cartridges
• Slot Select indicator is
on
Slot Select
Load the selected cartridge
into the tape drive
• Magazine contains at
least one cartridge
• Load/Unload indicator
is on
Load/Unload
Return the selected
cartridge to its original slot
in the magazine
Load/Unload indicator is
on
Load/Unload
Clear a magazine or loader
fault
• Load/Unload indicator
is on
• Magazine Fault or
Loader Fault indicator
is on
Load/Unload
Open the receiver, or
unload the cartridge from
the drive and open the
receiver
Eject indicator is on Eject
6.3 Operation Failure
Some manual operations, if not performed correctly, may cause write operations to fail
during. Examples are:
• Loading write-protected DLTtape III, DLTtape IIIxt or DLTtape IV cartridges
when executing write operations
• Selecting the incorrect cartridge slot from which to initialize operations