User's Manual

Configuring and Operating the DLT4700 Mini-Library
DLT4000/DLT4500/DLT4700 Cartridge Tape Subsystem 5-19
5.8.3 Unloading the Cartridge
_________________________ CAUTION_________________________
Do not press the Load/Unload button until backup or other
tape operations are stopped at the terminal. Doing so can
result in operation failure and drive unavailability.
_________________________ NOTE ____________________________
The Load/Unload indicator must be on before you press the
Load/Unload button to load or unload a cartridge.
___________________________________________________________
If …… Then ……
You want to unload the
cartridge from the drive
Press the Load/Unload button.
• The Select Slot, Load/Unload, and Eject
indicators turn off.
• The cartridge unloads from the drive into the
magazine.
However, automatic operation now stops and the
Select Slot operation does not move in increments.
The indicators turn on once the cartridge is
returned to the magazine.
The Loader Fault
indicator is on, showing
a malfunction
Press the Load/Unload button to reset the mini-
library and clear the error.