User's Manual

Configuring and Operating the DLT4700 Mini-Library
5-14 DLT4000/DLT4500/DLT4700 Cartridge Tape Subsystem
Table 5-2 DLT4700 Operator Control Panel (Cont’d)
Button/Indicator Color Function
Density Override Yellow Indicates tape drive activity as follows:
• On steadyyou selected a density from the
front panel.
• Off (default)density to be selected by the
host (automatic).
• Blinkingyou are in density selection
mode.
2.6 Yellow Indicates tape drive activity as follows:
• On steadytape is recorded in 2.6 GB
format.
• Blinkingtape is recorded in another
density. You selected this density for a write
from BOT (only in DLTtape III).
6.0 Yellow Indicates tape drive activity as follows:
• On steadytape is recorded in 6.0 GB
format.
• Blinkingtape is recorded in another
density. You selected this density for a write
from BOT (only in DLTtape III).
10.0/15.0 Yellow Indicates tape drive activity as follows:
• On steadytape is recorded in 10.0/15.0 GB
format.
• Blinkingtape is recorded in another
density. You selected this density for a write
from BOT (only in DLTtape III for 10.0
format and only in DLTtape IIIxt for 15.0
format).
20.0 Yellow Indicates tape drive activity as follows:
• On steadytape is recorded in 20.0 GB
format.
• Blinkingtape is recorded in another
density. You selected this density for a write
from BOT (only in DLTtape IV).