User's Manual

DLT4000/DLT4500/DLT4700 Cartridge Tape Subsystem 6-1
Chapter 6
Troubleshooting Guide for the
DLT4500/DLT4700 Mini-Library
6.1 In This Chapter
Chapter 6 includes the following main topics and sections:
Topic Section
Conditions Necessary for Button Operation 6.2
Operation Failure 6.3
Avoiding Basic Problems 6.4
Error Conditions : DLT4500 Mini-Library
DLT4700 Mini-Library
6.5
6.6
Power Problems 6.7
6.2 Conditions Necessary for Button Operation
Be sure to review information in the previous chapters to ensure you are correctly
operating the DLT4500/DLT4700 mini-library.
Before you press the Slot Select, Load/Unload, or Eject button on the
DLT4500/DLT4700 OCP, check for the conditions listed in Table 6-1 and ensure the:
• Power On indicator is on
• Receiver is closed
• Mode Select key is not set to OCP Disabled
Pressing these buttons has no effect if their indicators are off.