User's Manual

Configuring and Operating the DLT2500 Mini-Library
4-12 DLT2000/DLT2500/DLT2700 Cartridge Tape Subsytem
Table 4-2 Display Messages (Cont’d)
Display Message
Tells you …
……
…
OVR Tape drive activity as follows:
• On steady means you selected a density from the front
panel.
• Off (default) means density is selected automatically.
• Flashing means you are in density select mode.
2.6 Tape drive activity as follows:
• On steady means the tape is recorded in 2.6 format.
• Flashing means the tape is recorded in another
density. You selected this density for a write from
BOT.
6 Tape drive activity as follows:
• On steady means the tape is recorded in 6 GB format.
• Blinking means the tape is recorded in another
density. You selected this density for a write from
BOT.
10 Tape drive activity as follows:
• On steady means the tape is recorded in
10 GB format.
• Flashing means the tape is recorded in another
density. You selected this density for a write from
BOT.
10C Tape drive activity as follows:
• On means Compression mode is enabled.
Compression can be done in 10 GB density only.
• Off means Compression mode is disabled.