User's Manual

Configuring and Operating the DLT2500 Mini-Library
4-10 DLT2000/DLT2500/DLT2700 Cartridge Tape Subsytem
Table 4-1 lists each button and its function.
Table 4-1 Mini-Library Operator Control Panel
Button
Function
Display Mode Puts the mini-library in Normal, Density Select, or SCSI ID
Select mode.
Select
•= Selects SCSI ID and density.
•= Moves in increments the current slot number on the
display to the next slot number .
Load/Unload • Loads the currently selected cartridge into the tape drive
• Unloads the cartridge currently in the tape drive
• Resets the mini-library if a loader error has occurred.
When the ERR LDR message displays, press the
Load/Unload button to reset the mini-library.
Open
•= Opens the magazine door to access the magazine for
loading and unloading cartridges.
•= Unloads the cartridge currently in the tape drive and
returns the cartridge to its original slot. Then, opens the
magazine door.