User's Manual

Configuring and Operating the DLT2000 Basic Tape Drive
DLT2000/DLT2500/DLT2700 Cartridge Tape Subsystem 3-3
Figure 3-2 shows what the pins on the SCSI ID connector represent.
ID Pins
LKG-92 95-9 4F
Remote ID
Present
Disable
Parity
Figure 3-2 SCSI ID Connector Pins
_________________________ Note _____________________________
A jumper must always be placed on the Remote ID Present
position (Figure 3-2) for the host to recognize any ID
selection on this connector.
___________________________________________________________