User's Manual

Technical Specifications
DLT2000/DLT2500/DLT2700 Cartridge Tape Subsystem A-15
A.5 Vibration and Shock Specifications
Section A.5 describes environmental specifications:
Topic Section
Operating Shock and Vibration A.5.1
Nonoperating Shock and
Vibration
A.5.2
A.5.1 Operating Shock and Vibration
Table A-12 lists operating vibration specifications and Table A-13 lists operating
shock specifications.
Table A-12 Operating Vibration Specifications
Vibration type Sine Sweep
Frequency range 5−500-5 Hz Upward and downward sweep
Acceleration level 0.25 g
0.010" DA
Between 5 and 22 Hz (crossover)
Between 22 and 500 Hz
Application X, Y, and Z axes Sweep rate; 1 octave per minute
Overstress
Vibration type Sine Sweep
Frequency range 5−500-5 Hz Upward and downward sweep
Acceleration level 0.50 g
0.010" DA
Between 5 and 26.1 Hz (crossover)
Between 26.1 and 500 Hz
Application Vertical axis
(top/bottom)
Sweep rate; 1 octave per minute
Table A-13 Operating Shock Specifications
Pulse shape 1/2 sine pulse
Peak acceleration 10 G
Duration 10 ms
Application X, Y, and Z axes, once in each axis