User's Manual

DLT2000 SCSI Interface
DLT2000/DLT2700 Cartridge Tape Subsystem 8-131
8.5 Supported SCSI-2 Medium Changer Device Commands
On the Medium Changer LUN, only commands defined for this device type are
allowed. The following commands are implemented:
Table 8-11 SCSI-2 Medium Changer Commands
Opcode Command Section
07* INITIALIZE ELEMENT STATUS 8.5.1
12 INQUIRY 8.4.4
15+ MODE SELECT 8.5.3
1A+ MODE SENSE 8.5.3
A5* MOVE MEDIUM 8.5.4
3C READ BUFFER 8.4.14
B8* READ ELEMENT STATUS 8.5.2
1C RECEIVE DIAG RESULTS 8.4.16
17 RELEASE 8.4.17
03 REQUEST SENSE 8.4.18
16 RESERVE 8.4.19
1D SEND DIAGNOSTIC 8.4.21
00 TEST UNIT READY 8.4.23
3B WRITE BUFFER 8.4.26
* = Medium Changer specific commands
+ = Commands with significant Medium Changer specific content
The Inquiry, Send Diagnostic, Receive Diagnostic Results, Read/Write Buffer, and
Request Sense commands are documented in the preceding sections.
The rest of this chapter covers Medium Changer unique commands.