User's Manual

DLT2000/DLT2500/DLT2700 Cartridge Tape Subsystem 2-1
Chapter 2
Installing and Configuring the DLT2000
Tabletop Drive
2.1 In This Chapter
Chapter 2 includes the following main topics and sections:
Topic Section
Prepare for the Installation 2.2
Install the Subsystem 2.3
Configure the DLT2000 Tabletop 2.4
Connect the Cables 2.5
Test the Installation 2.6
DLT2000 Troubleshooting Chart 2.7
2.2 Prepare for the Installation
This section describes how to prepare for the installation of the DLT2000 cartridge tape
subsystem including:
Topic Section
Before You Start 2.2.1
Installation Setup 2.2.2
Site Setup 2.2.3
Site Guidelines 2.2.4
2.2.1 Before You Start
Installing the DLT2000 tabletop cartridge tape subsystem requires no special tools. If
you need to change the switchpack settings on the rear panel, you will need a pen.
If you have problems during the installation, see Table 2-4 for troubleshooting.