User's Manual

DLT2000 SCSI Interface
8-114 DLT2000/DLT2700 Cartridge Tape Subsystem
8.4.20 REWIND (01h)
Bit
76543210
0 Operation Code (01h)
Logical Unit Number Reserved Immed
Reserved
Byte
Unused Flag
1
Link
Reserved
2
Reserved
3
Reserved
4
5
Figure 8-72 REWIND CDB
REWIND tells the drive to position the tape at the beginning of the currently active
partition. Before rewinding, the drive writes any write data that is buffered to the tape,
and appends an EOD marker.
Immed
If the Immed (Immediate) bit is set, the drive first writes any remaining buffered data to
tape followed by an EOD marker. It then returns status to the host before beginning the
actual rewind operation. If the Immed bit is not set, status will be returned after the
rewind has completed.