User's Manual

Firmware Update (From Tape)
DLT2000/DLT2500/DLT2700 Cartridge Tape Subsystem 7-13
Table 7-2 Results (DLT2500 Code Update) Cont'd
If …
……
…
This means …
……
… And you should …
……
…
• The tape cartridge
with the valid update
image is not
readable.
1. Press the Unload button to
unload the tape cartridge
from the drive.
2. Press the Open button to
open the magazine door.
3. Remove the magazine and
close the door. The mini-
library does an elevator scan.
4. Open the door again. The
message LDR RDY displays.
5. Rebuild the valid image on a
good cartridge.
6. Try the code update
procedure again using the
valid tape image.
If you still cannot do the
update, call your service
representative.
• A power failure
occurs during the
code update. The
drive may be
unusable.
Try unloading the cartridge
from the drive, as described in
this table, to do the code
update again.
If you still cannot do the
update, call your service
representative.