User's Manual

Troubleshooting Guide for the DLT2500/DLT2700 Mini-Library
DLT2000/DLT2500/DLT2700 Cartridge Tape Subsystem 6-3
See Chapter 5 for more information on the functions of the DLT2700 OCP buttons.
Table 6-2 DLT2700 OCP Button Conditions
If you want to … First ensure the …
Then you can press
this button …
Select another slot in the
magazine
• Magazine contains at
least two cartridges
• Slot Select light is on
Slot Select
Load the selected cartridge
into the tape drive
• Magazine contains at
least one cartridge
• Load/Unload light is on
Load/Unload
Return the selected cartridge
to its original slot in the
magazine
Load/Unload light is on Load/Unload
Clear a magazine or loader
fault
• Load/Unload light is on
• Magazine Fault or Loader
Fault light is on
Load/Unload
Open the receiver, or unload
the cartridge from the drive
and open the receiver
Eject light is on Eject
6.3 Backup Operation Failure
Some manual operations, if not performed correctly, may cause backup operations to
fail during BACKUP:
• Loading write-protected CompacTape III cartridges when executing write
operations
• Selecting the incorrect cartridge slot from which to initialize operations