User's Manual

DLT2000/DLT2500/DLT2700 Cartridge Tape Subsystem-1
Index
A
AC Power Cord, A-4
Acoustic noise emissions, A-22
Altitude
environmental specifications, A-14
ATTENTION signal responses, 8-5
Automatic mode, 5-5, 5-7
B
BACKUP command
Automatic mode, 5-7
Backup failures, 6-3
Beeper, 3-11
Bugcheck Packets, D-2
BUS FREE, 8-7
BUS PARITY ERRORS, 8-7
Bus termination, 2-7
Button functions, conditions, 6-2
Button operation
conditions for, 6-3
Buttons, operating, 4-9
C
Cables
connecting, 2-5
SCSI signal cable, 2-6
Capacity, 1-2
Cartridge, 3-17, 4-20
acclimatization, 3-26
checking the tape leader, 6-4
ejection, 5-19
guidelines for care, 3-26
handling, 3-26
inserting into magazine, 5-20
labeling, 3-26
loading, 3-20, 5-17
positioning the write-protect switch, 3-17
preserving, 3-26
removing from the magazine, 5-23
storage, 3-26
unloading, 3-24, 5-18
using a, 3-22
using cleaning tape cartridge, 3-23
write-protect switch, 5-20
Cartridge insert/release handle
when to operate, 3-11
Cartridge, before loading, 4-21
Cartridge, insert, 4-23
Cartridge, loading into drive, 4-27
Cartridge, removing, 4-25
Cartridge, unloading from the drive, 4-28
Cartridge, write-protect switch, 4-21
Cleaning tape cartridge
using, 3-23
Cleaning tape cartridge,when to use, 4-29
Code Update (CUP) Status Packet, A-8
Code update mode, 4-19
Combined header and data mode, 8-94
Commands
sequential-access device commands, 8-15
Supported SCSI-2 medium changer device,
8-131
CompacTape Recording Media Specifications,
A-26
CompacTape Spec’s, A-26
Compaction, 1-2
Compatibility, 1-2
Conducted emissions, A-19
Conducted susceptibility, A-21
Configuration, 2-1
DLT2000 Tabletop, 2-4
guidelines, 2-4
Configuration guidelines, 4-7
Configure
DLT2700, 5-2
Configure the DLT2500 mini-library, 4-7
Connecting the SCSI Signal, 4-7
Connection
power cord, 2-7
Control byte, 8-14
Control mode, 8-78
Control Mode Page, 8-51