Manualshelf

User's Manual

ManualsBrandsQuantum ManualsStorageQuantum DLT2500
31323334353637383940
Installing and Configuring the DLT2000 Tabletop Drive
2-6 DLT2000/DLT2500/DLT2700 Cartridge Tape Subsystem
2.5.1 Examine the DLT2000 Rear Panel
Examine the components on the DLT2000 rear panel to complete the physical
installation (Figure 2-3).
O
I
MLO-012869
0
SCSI Signal
Connector (IN)
SCSI Signal Connector
(Out/Termination)
Power
Switch
Power
Connector
Figure 2-3 Rear Panel Components
2.5.2 Connect the SCSI Signal Cable
To connect the SCSI signal cable:
1. Connect one end of the SCSI cable to the leftmost SCSI signal connector on the
DLT2000 rear panel.
2. Snap the wire cable clamps into place to secure the cable.
3. Connect the other end of the SCSI signal cable to the SCSI connector on your
system or, for daisy-chained configurations, to another SCSI device.
See your system documentation for system SCSI connections.