User's Manual

DLT2000 SCSI Interface
8-20 DLT2000/DLT2700 Cartridge Tape Subsystem
• Product Revision Level - This field contains four bytes of ASCII data, which define the
product's software Revision Levels. The first tow bytes are the version number of servo
code. in the DLT2000 products, this firmware is located in a PROM and is not field
updateable. The second two bytes are the version number of the SCSI/read/write code.
When a firmware update is performed on the DLT2000 , this part of the Revision Level
field will change appropriately.
__________________________Note _____________________________
If a 5 cartridge media loader is attached to the tape drive, the Product ID will
indicate "DLT2500" instead of "DLT2000".
If a 7 cartridge media loader is attached to the tape drive, the Product ID will
indicate "DLT2700" instead of "DLT2000".
____________________________________________________________
Product Revision Level
This field contains four bytes of ASCII data, which define the product's software
Revision Levels. The first two bytes are the version number of servo code; the second
two bytes are the version number of the SCSI/read/write code. When a firmware
update is performed on the DLT2000 , the product Revision Level field will change
appropriately.
Vendor Specific
Vendor Specific - See next section.