User's Manual

DLT2000 SCSI Interface
DLT2000/DLT2700 Cartridge Tape Subsystem 8-15
8.4.2 Summary of Supported Sequential-Access Device
Commands
The following table shows what SCSI commands are supported by the DLT2000 tape
drive.
Table 8-2 DLT2000 Supported SCSI Commands
Opcode Command Section
19 ERASE 8.4.3
12 INQUIRY 8.4.4
1B LOAD-UNLOAD 8.4.5
2B LOCATE 8.4.6
4C LOG SELECT 8.4.7
4D LOG SENSE 8.4.8
15 MODE SELECT 8.4.9
1A /5A MODE SENSE 8.4.10
1E PREVENT/ALLOW MEDIUM REMOVAL 8.4.11
08 READ 8.4.12
05 READ BLOCK LIMITS 8.4.13
3C READ BUFFER 8.4.14
34 READ POSITION 8.4.15
1C RECEIVE DIAG RESULTS 8.4.16
17 RELEASE UNIT 8.4.17
03 REQUEST SENSE 8.4.18
16 RESERVE UNIT 8.4.19
01 REWIND 8.4.20
1D SEND DIAGNOSTIC 8.4.21
11 SPACE 8.4.22
00 TEST UNIT READY 8.4.23
13 VERIFY 8.4.24
0A WRITE 8.4.25
3B WRITE BUFFER 8.4.26
10 WRITE FILEMARK 8.4.27