User's Manual
Configuring and Operating the DLT2700 Mini-Library 
 5-20 DLT2000/DLT2500/DLT2700 Cartridge Tape Subsystem 
5.9 Magazine 
The front of the magazine has numbers, 0 through 6, that indicate the number of the 
slot. 
__________________________Note _____________________________ 
Insert and remove all cartridges at the front of the magazine. 
____________________________________________________________ 
5.9.1 Inserting a Cartridge into the Front of the Magazine 
To simplify cartridge insertion: place the magazine on a flat surface with the slots 
facing you (Figure 5-4). Each slot is numbered to ensure you are inserting the cartridge 
correctly in the front of the magazine. Usually, cartridges are inserted into consecutive 
slots. 
To insert a cartridge into the magazine: 
1.  Grasp the cartridge with the write-protect switch on the right side facing you 
(Figure 5-3). 
2.  Set the cartridge's write-protect switch to the desired position. 
If you want to …
……
… Then …
……
… 
Write to the tape  Slide the switch to the right (orange indicator is 
not visible) 
Write-protect the 
tape 
Slide the switch to the left (orange indicator is 
visible) 
3.  Insert the cartridge (Figure 5-4) by pushing it into the slot until you hear a click. A 
small metal tab holds the cartridge in place. 










