User's Manual

Configuring and Operating the DLT2000 Basic Tape Drive

3-2 DLT2000/DLT2500/DLT2700 Cartridge Tape Subsystem

3.2.1 Disabling Parity Checking

If your system does not generate parity, you can disable parity checking by adding a

jumper to the SCSI connector on the left side of the DLT2000 drive (Figure 3-1).

To disable parity:

1. Use Figure 3-1, Number

, to locate the SCSI ID connector on the drive.

Left Side

ZKO−1217−17−RGS

Right Side

Front

Bezel

Front

Bezel

1. TRM PWR/TRM ENB Connector

2. SCSI ID Connector

3. Loader Connector

Figure 3-1 DLT2000 Drive Connectors