User's Manual

Chapter 6 Shock and Vibration Specifications
Operating Shock and Vibration Specifications
DLT-V4 Product Specification 19
Operating Shock and Vibration Specifications 6
Operating Shock
Specifications
6
Table 12 lists the shock specifications for the tape drive while it is
operating.
Table 12 Half Sine Wave
Pulse Shock Operating
Vibration Specifications
Operating Vibration
Specifications
6
Table 13, table 14, and table 15 list the vibration specifications for the tape
drive while it is operating.
Table 13 Random Overstress
Operating Vibration
Specifications
Specification 5 G Shock 8 G Shock 62 G Shock
Pulse Shape ½ Sine Pulse ½ Sine Pulse ½ Sine Pulse
Peak
Acceleration
5 G 8 G 62 G
Duration 11 millisecond
(ms)
10 ms 2 ms
Application X, Y, and Z
axis, 10 pulses
per axis ( ), 60
total, 1 pulse
every 6
seconds
X, Y, and Z
axis, 1 pulse
per axis ( ), 6
total
X, Y, and Z
axis, 1 pulse
per axis ( ), 6
total
Factor Criteria Comments
Frequency
Range
5 to 800 Hz
Acceleration
Level
0.5 G
rms
Application X, Y, and Z axis Top to bottom, 10 minutes per
axis (min.)
±
±
±