User's Manual

Chapter 8 Using Your Tape Drive
Unload Button Actions
DLT-V4 Product Manual 55
Unload Button Actions 8
This section describes the unload button activity.
Table 10 Unload Button
Actions
Emergency reset
27 to 30
Revert back to normal mode
––––30+
Key
– Off On (orange or green)
Blinking Unchanged from previous condition
Field/Mode Actions
Normal unload
function
Release the unload button to unload the data
cartridge.
Enter code load
tape mode
Release the unload button to accept a data
cartridge that contains the firmware image (code
load). The LEDs then indicate code load mode.
Insert the data cartridge to begin the code update.
The tape drive returns to normal operation if you
do not load a data cartridge within 15 seconds.
Description
Ready
(green)
Fault
(orange
or clear)
Clean
(orange
or clear)
Media
(orange
or clear)
Hold Time
(seconds)