User's Manual

Chapter 7 Installing the Device Drivers
Microsoft Windows 2000
DLT-V4 Product Manual 49
c
In Device Manager, the DLT-V4 tape drive will be listed under
either “Tape drives” or “Other devices”. Locate the entry for the
DLT-V4 tape drive. Then double-click that entry to display the
Drive Properties.
d Click the Driver tab. Then click Update Driver ....
e The “Hardware Update Wizard” will start. Proceed with step 3.
3 Select “Install from a list or specific location (Advanced)”. Then click
Next.
4 In the next view, ensure that the option “Search for the best driver in
these locations” is selected. Then clear the “Search removable media”
box and instead select “Include this location in the search”.
5 Click Browse ..., and select the folder where you saved the driver
files. Then click
OK.
6 Click Next to install the driver. The next view completes the Wizard.
7 Click Finish. You may be prompted to reboot your system.
The DLT-V4 device driver is installed.
Microsoft Windows 2000 7
1 Make sure that you are logged on to the server or workstation with
Administrator privileges.
2 Download and extract the required driver files from
www.quantum.com.
3 The system may automatically detect the DLT-V4 tape drive and
display the “Found New Hardware Wizard”. If the Wizard appears,
proceed directly to step 4
, otherwise start the Wizard manually as
follows:
a Right-click My Computer, and select Manage from the drop-down
menu. This will start the Computer Management applet.
b In the left window under System Tools, double-click Device
Manager
.