User's Manual

Chapter 6 Installing the Tabletop USB/eSATA Tape Drive
eSATA requirements
DLT-V4 Product Manual 44
eSATA requirements 6
If you are using the eSATA configuration, use the external eSATA cable
provided in your accessories kit.
Installation Steps 6
To install the tape drive, perform the following tasks in this order. Follow
the detailed instructions on the pages listed below.
Table 6 Installing the Tabletop
SCSI Tape Drive
Step Instruction Page
1 Unpack and check the tape drive for shipping
damage.
Page 45
2 Select a location near the server or workstation
that is to host the tape drive.
Page 45
3 Download and install the current device driver
(if required) (see chapter 7, Installing the Device
Drivers).
Page 48
4 Install the tape drive. Page 46
5 Confirm the installation. Page 47